Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Zablackaite, G.; Shiotsu, Hiroyuki; Kido, Kentaro; Sugiyama, Tomoyuki
Nuclear Engineering and Technology, 56(2), p.536 - 545, 2024/02
Times Cited Count：0Yoshida, Kazuo; Tamaki, Hitoshi; Hiyama, Mina*
JAEA-Research 2023-001, 26 Pages, 2023/05
JAEA-Research-2023-001.pdf:1.61MB
An accident of evaporation to dryness by boiling of high-level radioactive liquid waste (HLLW) is postulated as one of the severe accidents caused by the loss of cooling function at a fuel reprocessing plant. In this case, volatile radioactive materials, such as ruthenium (Ru) are released from the tanks with water and nitric-acid mixed vapor into the atmosphere. Accurate quantitative estimation of released Ru is one of the important issues for risk assessment of those facilities. To resolve this issue, an analytical approach has been developed using computer simulation programs to assess the radioactive source term from those facilities. The proposed approach consists analyses with three computer programs. At first, the simulation of boiling behavior in the HLLW tank is conducted with SHAWED code. Next step, the thermal-hydraulic behavior in the facility building is simulated with MELCOR code based on the results at the first step simulation such as flowed out mixed steam flow rate, temperature and volatilized Ru from the tank. The final analysis step is carried out for estimating amount of released radioactive materials with SCHERN computer code which simulates chemical behaviors of nitric acid, nitrogen oxide and Ru based on the condition also simulated MELCOR. Series of sample simulations of the accident at a hypothetical typical facility are presented with the data transfer between those codes in this report.
Watanabe, Tomoaki; Yamane, Yuichi
Journal of Nuclear Science and Technology, 9 Pages, 2023/00
Times Cited Count：0 Percentile：0.01(Nuclear Science & Technology)The total fission energy released in a criticality accident involving fissile solution boiling tends to be high because the relatively high fission power continues during boiling. Simulating fission power change correctly during boiling seems essential to estimate the total fission energy. Fission power during boiling changes depending on fissile concentration and volume as the solution evaporates. In this study, we investigated the effect of concentration and volume change on estimated total fission energy for a long time of boiling. We introduced a model calculating the evaporation of fissile solution into the modified quasi-steady-state method to simulate power change during boiling. Three CRAC experiments and the Idaho Chemical Processing Plant (ICPP) criticality accident in 1959 were analyzed. As a result, the calculated energy considering concentration and volume change during boiling reproduced the measured energy well.
Yoshida, Kazuo; Tamaki, Hitoshi; Hiyama, Mina*
JAEA-Research 2022-011, 37 Pages, 2022/12
JAEA-Research-2022-011.pdf:2.88MB
An accident of evaporation to dryness by boiling of high level liquid waste (HLLW) is postulated as one of the severe accidents at a fuel reprocessing plant. Two major mechanisms are expected for fission products (FPs) transfer from liquid to vapor phase. One is non-volatiles FPs transfer in the form of mists to the vapor phase in the tank, the other is volatilization of such as Ruthenium. These FPs transferred to the vapor phase in the tank could be released with water and nitric-acid mixed steam and NO
gas flow to the environment. NO is generated from denitration of nitrate fission products during dry out phase. These phenomena occurred in this accident originate from the liquid waste boiling in the tank. It is essential for the risk assessment of this accident to simulate thermo-hydraulic and chemical behaviors in the waste tank quantitatively with a versatile computer program. The SHAWED (
imulation of 
igh-level radio
ctive 
aste 
vaporation and 
ryness) has been developed to realize these requirements. In this report, detailed description of major analytical models is explained based on the features of this accident, and some simulation examples are also described for the use in an actual risk assessment.
Ono, Ayako; Sakashita, Hiroto*; Yamashita, Susumu; Suzuki, Takayuki*; Yoshida, Hiroyuki
Proceedings of 12th Japan-Korea Symposium on Nuclear Thermal Hydraulics and Safety (NTHAS12) (Internet), 7 Pages, 2022/10
The new prediction method of critical heat flux (CHF) of the fuel assemblies based on the mechanism is proposed in this study. The prediction method of CHF based on the mechanism has been needed for a long time to enhance the safety analysis and reduce the design cost. From several experimental findings of the liquid-vapor behavior near the heating surface from the nucleate boiling to the CHF, the authors consider that the macrolayer dryout model will be appropriate to predict the CHF under the reactor condition. The prediction method of the macrolayer thickness and the passage period of vapor mass in the fuel assemblies are needed to predict CHF from the macrolayer dryout model. In this study, the CHF under the forced convection is evaluated by combining the prediction methods for the macrolayer thickness and passage period of vapor mass, which are proposed by authors. The prediction of the CHF under the forced convection is examined and compared with the experimental data.
Yamaguchi, Akinori*; Yokotsuka, Muneyuki*; Furuta, Masayo*; Kubota, Kazuo*; Fujine, Sachio*; Mori, Kenji*; Yoshida, Naoki; Amano, Yuki; Abe, Hitoshi
Nihon Genshiryoku Gakkai Wabun Rombunshi (Internet), 21(4), p.173 - 182, 2022/09
Risk information obtained from probabilistic risk assessment (PRA) can be used to evaluate the effectiveness of measures against severe accidents in nuclear facilities. The PRA methods used for reprocessing facilities are considered immature compared to those for nuclear power plants, and to make the methods mature, reducing the uncertainty of accident scenarios becomes crucial. In this paper, we summarized the results of literature survey on the event progression of evaporation to dryness caused by boiling of high-level liquid waste (HLLW) which is a severe accident in reprocessing facilities and migration behavior of associated radioactive materials. Since one of the important characteristics of Ru is its tendency to form volatile compounds over the course of the event progression, the migration behavior of Ru is categorized into four stages based on temperature. Although no Ru has been released in the waste in the high temperature region, other volatile elements such as Cs could be released. Sufficient experimental data, however, have not been obtained yet. It is, therefore, necessary to further clarify the migration behavior of radioactive materials that predominantly depends on temperature in this region.
Ono, Ayako; Yamashita, Susumu; Sakashita, Hiroto*; Suzuki, Takayuki*; Yoshida, Hiroyuki
Proceedings of 13th International Topical Meeting on Nuclear Reactor Thermal-Hydraulics, Operation and Safety (NUTHOS-13) (Internet), 12 Pages, 2022/09
Japan Atomic Energy Agency is developing the computational fluid dynamics code, JUPITER, based on the volume of fluid (VOF) method to analyze detailed thermal-hydraulics in a reactor. The detailed numerical simulation of boiling from a heating surface needs a substantial computational cost to resolve the microscale thermal-hydraulic phenomena such as the bubble generation from a cavity and evaporation of a micro-layer. This study developed the simplified boiling model from the heating surface to reduce the computational cost, which will apply to the detailed simulation code based on the surface tracking method such as JUPITER. We applied the simplified boiling model to JUPITER, and compared the simulation results with the experimental data of the vertical heating surface in the forced convection. We confirmed the degree of their reproducibility, and the issues to be modified were extracted.
Ono, Ayako; Yamashita, Susumu; Sakashita, Hiroto*; Suzuki, Takayuki*; Yoshida, Hiroyuki
Dai-26-Kai Doryoku, Enerugi Gijutsu Shimpojiumu Koen Rombunshu (Internet), 4 Pages, 2022/07
JAEA is implementing a simulation of a two-phase flow in the reactor core by TPFIT and JUPITER which are developed by JAEA based on the surface tracking method. However, it is impossible to simulate a boiling on the heating surface in the large-scale domain by this type of simulation method since the simulation of boiling based on the surface tracking method needs the fine mesh which sufficiently resolves the initiation of boiling. Therefore, JAEA started to develop the simplified boiling model applied for the two-phase flow in the fuel assemblies. In this study, the simulation results of the convection boiling on a vertical heating surface and the comparison between the simulation results and experimental results are shown.
Kubo, Kotaro; Jang, S.*; Takata, Takashi*; Yamaguchi, Akira*
Journal of Nuclear Science and Technology, 59(3), p.357 - 367, 2022/03
Times Cited Count：5 Percentile：65.59(Nuclear Science & Technology)Dynamic probabilistic risk assessment (PRA), which handles epistemic and aleatory uncertainties by coupling the thermal-hydraulics simulation and probabilistic sampling, enables a more realistic and detailed analysis than conventional PRA. However, enormous calculation costs are incurred by these improvements. One solution is to select an appropriate sampling method. In this paper, we applied the Monte Carlo, Latin hypercube, grid-point, and quasi-Monte Carlo sampling methods to the dynamic PRA of a station blackout sequence in a boiling water reactor and compared each method. The result indicated that quasi-Monte Carlo sampling method handles the uncertainties most effectively in the assumed scenario.
Yoshida, Kazuo; Tamaki, Hitoshi; Hiyama, Mina*
JAEA-Research 2021-013, 20 Pages, 2022/01
JAEA-Research-2021-013.pdf:2.35MB
An accident of evaporation to dryness by boiling of high level liquid waste (HLLW) is postulated as one of the severe accidents caused by the loss of cooling function at a fuel reprocessing plant. In this case, volatile radioactive materials, such as ruthenium (Ru) are released from the tanks with water and nitric-acid mixed vapor into atmosphere. An idea has been proposed to implement a steam condenser as an accident countermeasure. This measure is expected to prevent nitric acid steam diffusing in facility building and to increase gaseous Ru trapping ratio into condensed water. A simulation study has been carried out with a hypothetical typical facility building to analyze the efficiency of steam condenser. In this study, SCHERN computer code simulates chemical behaviors of Ru in nitrogen oxide, nitric acid and water mixed vapor based on the conditions obtained from simulation with thermal-hydraulic computer code MELCOR. The effectiveness of steam condenser has been analyzed quantitively in preventing mixed vapor diffusion and gaseous Ru trapping effect. Some issues to be solved in analytical model has been also clarified in this study.
Yoshida, Naoki; Ono, Takuya; Yoshida, Ryoichiro; Amano, Yuki; Abe, Hitoshi
JAEA-Research 2021-011, 12 Pages, 2022/01
JAEA-Research-2021-011.pdf:1.49MB
In boiling and drying accidents involving high-level liquid waste in fuel reprocessing plants, emphasis is placed on the behavior of ruthenium (Ru). Ru would form volatile species, such as ruthenium tetroxide (RuO
), and could be released to the environment with coexisting gases, including nitric acid, water, or nitrogen oxides. In this study, to contribute toward safety evaluations of these types of accidents, the migration behavior of gaseous Ru into the liquid phase has been experimentally measured by simulating the condensate during an accident. The gas absorption of RuO was enhanced by increasing the nitrous acid (HNO) concentration in the liquid phase, indicating the occurrence of chemical absorption. In control experiments without HNO, the lower the temperature, the greater was the Ru recovery ratio in the liquid phase. Conversely, in experiments with HNO, the higher the temperature, the higher the recovery ratio, suggesting that the reaction involved in chemical absorption was activated at higher temperatures.
Okawa, Tomio*; Mori, Shoji*; Liu, W.*; Ose, Yasuo*; Yoshida, Hiroyuki; Ono, Ayako
Nihon Genshiryoku Gakkai-Shi ATOMO
, 63(12), p.820 - 824, 2021/12
The evaluation method of the critical heat flux based on the mechanism is needed for the efficient design and development of fuel in reactors and the appropriate safety evaluation. In this paper, the current researches relating to the mechanism of the critical heat flux are reviewed, and the issue to be considered in the future are discussed.
Yoshida, Kazuo; Tamaki, Hitoshi; Hiyama, Mina*
JAEA-Research 2021-005, 25 Pages, 2021/08
JAEA-Research-2021-005.pdf:2.91MB
An accident of evaporation to dryness by boiling of high level liquid waste (HLLW) is postulated as one of the severe accidents caused by the loss of cooling function at a fuel reprocessing plant. In this case, volatile radioactive materials, such as ruthenium (Ru) are released from the tanks with water and nitric-acid mixed vapor into atmosphere. Accurate quantitative estimation of released Ru is one of the important issues for risk assessment of those facilities. To resolve this issue, an empirical correlation equation of Ru mass transfer coefficient across the vapor-liquid surface, which can be useful for quantitative simulation of Ru mitigating behavior, has been obtained from data analyses of small-scale experiments conducted to clarify gaseous Ru migrating behavior under steam-condensing condition. A simulation study has been also carried out with a hypothetical typical facility building successfully to demonstrate the feasibility of quantitative estimation of amount of Ru migrating in the facility using the obtained correlation equation implemented in SCHERN computer code which simulates chemical behaviors of nitrogen oxide based on the condition also simulated thermal-hydraulic computer code.
Yoshida, Kazuo; Tamaki, Hitoshi; Hiyama, Mina*
JAEA-Data/Code 2021-008, 35 Pages, 2021/08
JAEA-Data-Code-2021-008.pdf:3.68MB
An accident of evaporation to dryness by boiling of high level liquid waste (HLLW) is postulated as one of the severe accidents caused by the loss of cooling function at a fuel reprocessing plant. In this case, volatile radioactive materials, such as ruthenium (Ru) are released from the tanks with water and nitric-acid mixed vapor into atmosphere. In addition to this, nitrogen oxides (NO
) are also released formed by the thermal decomposition of metal nitrates of fission products (FP) in HLLW. It has been observed experimentally that NOx affects to the migration behavior of Ru at the anticipated atmosphere condition in cells and/or compartments of the facility building. Chemical reactions of NO with water and nitric acid are also recognized as the complex phenomena to undergo simultaneously in the vapor and liquid phases. The analysis program, SCHERN has been under developed to simulate chemical behavior including Ru coupled with the thermo-hydraulic condition in the flow paths in the facility building. This technical guide for SCHERN-V2 presents the overview of covered accident, analytical models including newly developed models, differential equations for numerical solution, and user instructions.
Saito, Shimpei*; De Rosis, A.*; Fei, L.*; Luo, K. H.*; Ebihara, Kenichi; Kaneko, Akiko*; Abe, Yutaka*
Physics of Fluids, 33(2), p.023307_1 - 023307_21, 2021/02
Times Cited Count：31 Percentile：98.32(Mechanics)A Boiling phenomenon in a liquid flow field is known as forced-convection boiling. We numerically investigated the boiling system on a cylinder in a flow at a saturated condition. To deal with such a phenomenon, we developed a numerical scheme based on the pseudopotential lattice Boltzmann method. The collision was performed in the space of central moments (CMs) to enhance stability for high Reynolds numbers. Furthermore, additional terms for thermodynamic consistency were derived in a CMs framework. The effectiveness of the model was tested against some boiling processes, including nucleation, growth, and departure of a vapor bubble for high Reynolds numbers. Our model can reproduce all the boiling regimes without the artificial initial vapor phase. We found that the Nukiyama curve appears even though the focused system is the forced-convection system. Also, our simulations support experimental observations of intermittent direct solid-liquid contact even in the film-boiling regime.
Ono, Ayako; Sakashita, Hiroto*; Yoshida, Hiroyuki
Heat Transfer Engineering, 42(21), p.1775 - 1788, 2021/00
Times Cited Count：3 Percentile：23.27(Thermodynamics)In this study, the macrolayer formation model is proposed to predict the critical heat flux in the saturated and subcooled pool boiling based on the macrolayer dryout model. This model concept is based on the results of the previous experiments. In the model, the nucleation site is assumed to distribute based on the Poisson distribution. Combining the proposed macrolayer formation model and macrolayer dryout model, the CHFs up to subcooling 40K were predicted and they are successfully good agreement with the experimental data. Moreover, the concept of the model was confirmed by the numerical simulation using the TPFIT.
Yoshida, Naoki; Amano, Yuki; Ono, Takuya; Yoshida, Ryoichiro; Abe, Hitoshi
JAEA-Research 2020-014, 33 Pages, 2020/12
JAEA-Research-2020-014.pdf:3.66MB
Considering the boiling and drying accident of high-level liquid waste in fuel reprocessing plant, Ruthenium (Ru) is an important element. It is because Ru would form volatile compounds such as ruthenium tetroxide (RuO) and could be released into the environment with other coexisting gasses such as nitric oxides (NOx) such as nitric oxide (NO) and nitrogen dioxide (NO). To contribute to the safety evaluation of this accident, we experimentally evaluated the effect of NOx on the decomposition and chemical change behavior of the gaseous RuO (RuO(g)). As a result, the RuO(g) decomposed over time under the atmospheric gasses with NO or NO, however, the decomposition rate was slower than the results of experiments without NOx. These results showed that the NOx stabilized RuO(g).
Ioka, Ikuo; Kuriki, Yoshiro*; Iwatsuki, Jin; Kawai, Daisuke*; Yokota, Hiroki*; Inagaki, Yoshiyuki; Kubo, Shinji
Proceedings of 2020 International Conference on Nuclear Engineering (ICONE 2020) (Internet), 5 Pages, 2020/08
A thermochemical water-splitting iodine-sulfur processes (IS process) is one of candidates for the large-scale production of hydrogen using heat from solar power. Severe corrosive environment which is thermal decomposition of sulfuric acid exists in the IS process. A hybrid material with the corrosion-resistance and the ductility was made by a plasma spraying and laser treatment. The specimen had excellent corrosion resistance in the condition of 95 mass% boiling sulfuric acid. This was attributed to the formation of SiO on the surface. The container using the hybrid material was experimentally made. The pre-oxidized container using hybrid technique was prepared for the corrosion test in boiling sulfuric acid to evaluate the corrosion characteristics of the container. There was no detaching of the surface with the weld part and the R processing. We proposed the calculation method of corrosion rate from the ions dissolved in the sulfuric acid solution after the corrosion test.
Lu, K.; Katsuyama, Jinya; Li, Y.
Proceedings of ASME 2020 Pressure Vessels and Piping Conference (PVP 2020) (Internet), 10 Pages, 2020/08
Miwa, Shuhei; Takase, Gaku; Imoto, Jumpei; Nishioka, Shunichiro; Miyahara, Naoya; Osaka, Masahiko
Journal of Nuclear Science and Technology, 57(3), p.291 - 300, 2020/03
Times Cited Count：7 Percentile：55.67(Nuclear Science & Technology)For the evaluation of transport behavior of control material boron in a severe accident of BWR from the viewpoint of chemical effects on cesium and iodine behavior, boron chemistry during transportation in the high temperature region above 400 K was experimentally investigated. The heating tests of boron oxide specimen were conducted using the dedicated experimental apparatus reproducing fission product release and transport in steam atmosphere. Released boron oxide vapor was deposited above 1,000 K by the condensation onto stainless steel. The boron deposits and/or vapors significantly reacted with stainless steel above 1,000 K and formed the stable iron-boron mixed oxide (FeO)BO
. These results indicate that released boron from degraded BWR control blade in a severe accident could remain in the high temperature region such as a Reactor Pressure Vessel. Based on these results, it can be said that the existence of boron deposits in the high temperature region would decrease the amount of transported cesium vapors from a Reactor Pressure Vessel due to possible formation of low volatile cesium borate compounds by the reaction of boron deposits with cesium vapors.
